How To Change or Install New Windshield Wipers

wipermarket.com / 2008-11-11

Clicking the New Wipers Into Place

Slide the arm into the wiper like this.

photo mw

Now that you've lined everything up you can put it all together. There's a trick to this part, too.

With everything lined up, lower the wiper over the wiper arm, putting the arm between the sides of the wiper and with the open end of the "hook" facing the plastic clip.
Move the hook over the plastic clip, then pull the wiper upward so that the clip's rounded edge slides into the hook.
Pull it tight so the assembly clicks into place.
Carefully lower the wiper back to the windshield.
Repeat the whole process for the other side and you're done!

No comment

Run 27 queries, spents 0.038858 seconds, online 2，Gzip disabled，Take up memory 2.167 MB