Pinch Tab GVM- Function D Adapter

Wiper Blade Installation Instructions for the:

Pinch Tab GVM- Function D Adapter

This wiper arm is being installed on 10% of 2007 and 2008 vehicles being introduced by auto manufacturers. The Function D Adapter is included in the package.

Installation Guide »
 

Step 1

Remove the Function C Adapter that is attached to the wiper by placing your finger under the nose and body of the adapter and pulling it off. You can use a screw driver to pry it off. Don’t worry about breaking the adapter. You will not need it.

Step 2

Take the Function D Adapter that came in the package and turn it upside down. Locate the center channel, or groove, that you will be locking onto to the FlexBlade GVM frame. Line up the channel, or center groove, with the raised locking hump on the frame and then press down until you hear it click or snap in place.

Step 3

Place FlexBlade GVM into the wiper arm of your vehicle and it will lock under the push button.